Rheology Control Coating

 
 

Rheology Control Coating

 

In textile industry, silicone rubber for anti-slipping is widely used. Most application involves screen printing and dispensing. Both require non-Newtonian liquid silicone for desired patterns and shapes. However, adding thixotropic chemicals into silicone may cause unstable viscosity by time. Our thixotropic silicones are all developed for specific applications. And they are always at spot-on state of viscosity for prefect printing and dispensing effects. For a silicone coating of less than 0.5mm, a resin product is more suitable than regular silicone rubber, this is because the curing mechanism of resin is 3 dimensional which is more rigid than regular silicone rubber.

For coatings over 0.5mm, regular silicone rubber can be used for a lot less cost than resin. However, pot life of thin layer is a lot shorter than layer of over 5mm. Solvent solution is recommended for most silicone coating applications.

 

See TDS 28 Textile Lace Coating LS07 for more.