Heat-cure, room-cure?

 
 

Heat-cure, room-cure?

  

Heat-cure is suitable for production of large number of small items. It has the advantage of short curing time in minutes at elevated temperature, as well as a lot longer pot life for preparation between batches. The down side is energy cost, hot mold to handle and shrinkage concerns.
Room temperature cure is suitable for sophisticated molding. It has the advantages of near 0 shrinkage, easy to handle and with less energy cost. But a well-built automatic 2-part or 3-part dispensing machine is essential
Platinum-cure silicone has the advantage of Bio-compatible, fast-cure and no curing by-product. The down side is the curing needs to avoid platinum poison which causes curing inhibition.
Condensation-cure has no curing inhibition, it cures with almost any substance. But the Tin catalyst and curing by-product are major health and environment concerns. It also has over 10 times larger shrinkage than platinum-cure after curing.
Fast-cure silicone features both advantages, but a set of dispenser with static mixer is a must have to apply.

 

See TDS 23 Mold Making 3 Parts for more.